Posts for tag: crowns
Want to know the exact wrong way to pry open a stubborn lid? Just ask Jimmy Fallon, host of NBC-TV’s popular “Tonight Show.” When the 40-year-old funnyman had trouble opening a tube of scar tissue repair gel with his hands, he decided to try using his teeth.
What happened next wasn’t funny: Attempting to remove the cap, Fallon chipped his front tooth, adding another medical problem to the serious finger injury he suffered a few weeks before (the same wound he was trying to take care of with the gel). If there’s a moral to this story, it might be this: Use the right tool for the job… and that tool isn’t your teeth!
Yet Fallon is hardly alone in his dilemma. According to the American Association of Endodontists, chipped teeth account for the majority of dental injuries. Fortunately, modern dentistry offers a number of great ways to restore damaged teeth.
If the chip is relatively small, it’s often possible to fix it with cosmetic bonding. In this procedure, tough, natural-looking resin is used to fill in the part of the tooth that has been lost. Built up layer by layer, the composite resin is cured with a special light until it’s hard, shiny… and difficult to tell from your natural teeth. Best of all, cosmetic bonding can often be done in one office visit, with little or no discomfort. It can last for up to ten years, so it’s great for kids who may be getting more permanent repairs later.
For larger chips or cracks, veneers or crowns may be suggested. Veneers are wafer-thin porcelain coverings that go over the entire front surface of one or more teeth. They can be used to repair minor to moderate defects, such as chips, discolorations, or spacing irregularities. They can also give you the “Hollywood white” smile you’ve seen on many celebrities.
Veneers are generally custom-made in a lab, and require more than one office visit. Because a small amount of tooth structure must be removed in order to put them in place, veneers are considered an irreversible treatment. But durable and long-lasting veneers are the restorations of choice for many people.
Crowns (also called caps) are used when even more of the tooth structure is missing. They can replace the entire visible part of the tooth, as long as the tooth’s roots remain viable. Crowns, like veneers, are custom-fabricated to match your teeth in size, shape and color; they are generally made in a dental lab and require more than one office visit. However, teeth restored with crowns function well, look natural, and can last for many years.
So what happened to Jimmy Fallon? We aren’t sure which restoration he received… but we do know that he was back on TV the same night, flashing a big smile.
If you would like more information about tooth restorations, please contact us or schedule a consultation. You can learn more in the Dear Doctor magazine articles “Porcelain Crowns & Veneers” and “Artistic Repair Of Front Teeth With Composite Resin.”
You might think David Copperfield leads a charmed life:Â He can escape from ropes, chains, and prison cells, make a Learjet or a railroad car disappear, and even appear to fly above the stage. But the illustrious illusionist will be the first to admit that making all that magic takes a lot of hard work. And he recently told Dear Doctor magazine that his brilliant smile has benefitted from plenty of behind-the-scenes dental work as well.
“When I was a kid, I had every kind of [treatment]. I had braces, I had headgear, I had rubber bands, and a retainer afterward,” Copperfield said. And then, just when his orthodontic treatment was finally complete, disaster struck. “I was at a mall, running down this concrete alleyway, and there was a little ledge… and I went BOOM!”
Copperfield’s two front teeth were badly injured by the impact. “My front teeth became nice little points,” he said. Yet, although they had lost a great deal of their structure, his dentist was able to restore those damaged teeth in a very natural-looking way. What kind of “magic” did the dentist use?
In Copperfield’s case, the teeth were repaired using crown restorations. Crowns (also called caps) are suitable when a tooth has lost part of its visible structure, but still has healthy roots beneath the gum line. To perform a crown restoration, the first step is to make a precise model of your teeth, often called an impression. This allows a replacement for the visible part of the tooth to be fabricated, and ensures it will fit precisely into your smile. In its exact shape and shade, a well-made crown matches your natural teeth so well that it’s virtually impossible to tell them apart. Subsequently, the crown restoration is permanently attached to the damaged tooth.
There’s a blend of technology and art in making high quality crowns — just as there is in some stage-crafted illusions. But the difference is that the replacement tooth is not just an illusion: It looks, functions and “feels” like your natural teeth… and with proper care it can last for many years to come.Â Besides crowns, there are several other types of tooth restorations that are suitable in different situations. We can recommend the right kind of “magic” for you.
If you would like more information about crowns, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine articles “Crowns & Bridgework” and “Porcelain Crowns & Veneers.”
If you've lost a tooth, you have a number of options for replacing it. Perhaps the best choice in terms of lifelikeness and durability is a dental implant.
All implants have the same basic architecture: a titanium metal post imbedded in the jawbone to replace the root; and an abutment, a metal collar that links the post with a lifelike porcelain crown. But implants can vary in how the crown attaches to the abutment and post — either cemented to the abutment or screwed through the abutment to the post.
Either method will permanently secure the crown to the implant. But there are advantages and disadvantages for each.
A screw-retained crown may better facilitate any future repair that might be needed. For a skilled dentist it's a simple matter of removing the screw and then the crown from the abutment. There's less risk of damage to the implant during repairs or crown replacement. Many dentists also prefer screws for crowns placed at the same time they're installing the implant post (a procedure called immediate loading).
The screw access hole, however, could pose a cosmetic problem. Although we can cover it over with tooth-colored filling, it may still be noticeable and unattractive especially for a tooth visible when you smile (in the smile zone). There's also the possibility the porcelain around the access hole could chip.
By contrast, cemented crowns have a smooth, unbroken surface and are aesthetically ideal for smile zone teeth. But the cement could interact poorly with gum and bone tissue in some patients, causing inflammation and possible bone loss.
And unlike screw-retained crowns, cemented crowns are difficult to remove for implant repair. We may have to drill through the crown to access the screw between the abutment and the post, and then repair it cosmetically if we use the same crown. Again, the final result may not be quite as visually appealing.
In the end, it will depend on the implant's location, how your body reacts to the cement or your dentist's preference. In either case, though, you'll have a tooth replacement that's functional, life-like and able to endure for many years to come.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Crowns Attach to Implants.”
Let’s say you’re traveling to Italy to surprise your girlfriend, who is competing in an alpine ski race… and when you lower the scarf that’s covering your face, you reveal to the assembled paparazzi that one of your front teeth is missing. What will you do about this dental dilemma?
Sound far-fetched? It recently happened to one of the most recognized figures in sports — Tiger Woods. There’s still some uncertainty about exactly how this tooth was taken out: Was it a collision with a cameraman, as Woods’ agent reported… or did Woods already have some problems with the tooth, as others have speculated? We still don’t know for sure, but the big question is: What happens next?
Fortunately, contemporary dentistry offers several good solutions for the problem of missing teeth. Which one is best? It depends on each individual’s particular situation.
Let’s say that the visible part of the tooth (the crown) has been damaged by a dental trauma (such as a collision or a blow to the face), but the tooth still has healthy roots. In this case, it’s often possible to keep the roots and replace the tooth above the gum line with a crown restoration (also called a cap). Crowns are generally made to order in a dental lab, and are placed on a prepared tooth in a procedure that requires two office visits: one to prepare the tooth for restoration and to make a model of the mouth and the second to place the custom-manufactured crown and complete the restoration. However, in some cases, crowns can be made on special machinery right in the dental office, and placed during the same visit.
But what happens if the root isn’t viable — for example, if the tooth is deeply fractured, or completely knocked out and unable to be successfully re-implanted?
In that case, a dental implant is probably the best option for tooth replacement. An implant consists of a screw-like post of titanium metal that is inserted into the jawbone during a minor surgical procedure. Titanium has a unique property: It can fuse with living bone tissue, allowing it to act as a secure anchor for the replacement tooth system. The crown of the implant is similar to the one mentioned above, except that it’s made to attach to the titanium implant instead of the natural tooth.
Dental implants look, function and “feel” just like natural teeth — and with proper care, they can last a lifetime. Although they may be initially expensive, their quality and longevity makes them a good value over the long term. A less-costly alternative is traditional bridgework — but this method requires some dental work on the adjacent, healthy teeth; plus, it isn’t expected to last as long as an implant, and it may make the teeth more prone to problems down the road.
What will the acclaimed golfer do? No doubt Tiger’s dentist will help him make the right tooth-replacement decision.
If you have a gap in your grin — whatever the cause — contact us or schedule an appointment for a consultation, and find out which tooth-replacement system is right for you. You can learn more in the Dear Doctor magazine articles “Dental Implant Surgery” and “Crowns & Bridgework.”
Restoring missing or unattractive teeth can often be a lengthy process. Months may elapse between initial teeth preparation and final placement to allow time for tissue healing and permanent crown manufacturing. During that period you will likely wear temporary (provisional) crowns to protect the teeth while improving function and appearance.
In the past, provisional crowns were fairly uniform. Today, though, there are provisional crowns available that conform exactly to a patient’s individual mouth. These crowns not only enhance function and appearance, they’re an excellent way to “try out” your new smile before the permanent restoration.
Customized provisional crowns are part of a concept known as “smile analysis.” A new smile involves more than restoring affected teeth: we also consider the overall health of your mouth, the shape of your face, and your own desires and expectations. Your final smile design is a joint collaboration between you, our office and the dental laboratory that will fashion the final restoration.
There are a number of techniques for creating customized provisional crowns. Some techniques involve bonding tooth-colored materials like composite resin directly to the teeth. Others use impression models of your teeth to create an outline or shell that’s filled with an acrylic material and then affixed to your teeth. The aim with any of these techniques is to produce a provisional crown that accurately reflects the final crown’s appearance.
With these types of provisional crowns, we can see how the new teeth will look (their color, shading, shapes and proportions) against the gums, and if they appear to be in balance and harmony with the entire face, including your lips, jaws and facial contour. We can also evaluate how well the new teeth function as you chew, speak or smile.
It takes some extra effort to prepare customized provisional crowns rather than the more uniform version. But this effort is well worth it: by helping us anticipate more accurately how your new restorations will appear and function, customized crowns help ensure your new smile is an attractive and satisfying one.
If you would like more information on temporary restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Concepts of Temporary Restorations.”